PuraSecureSBD PAS23/4 Entry Doorsets
PAS23 General performance requirements for door assemblies
Single leaf, external door assemblies to dwellings.
PAS 24 Enhanced security performance requirements for door assemblies
Single and double leaf, hinged internal and external door assemblies.
- PuraSecure PAS24 – Internal Entrance Doorsets
- PuraSecure Stormcheck PAS23 and 24 tested , Fire rated
- PuraSecure Crimecheck PAS23 and 24 tested, Fire rated
- PuraSecure Extremetherm PAS23/24 and SBD U-value 1.1
- PuraSecure Ultratherm PAS23 and 24 tested U-value 0.9
PuraSecure doorsets are supplied pre-hung in frames with relevant hardware installed as tested.
The balance of ironmongery where not installed to the doors is packed according to schedules in doorsets boxes , labelled and delivered to site for installation by the carpentry team.
Servicing items available:
- Multipoint security entrance door locks
- Letter plates and
- Door viewers
- Drop seals and perimeter seals
- Concealed overhead door closers
- Flush bolts to double doorsets
- Mortice locks and card access control lockcases where relevant approval is available
FSC® /PEFC. Dorplan is fully accredited to supply doorsets with FSC® (Forestry Stewardship Council) accreditation cover.
Certificate number TT-COC-005225
ISO14001 – Dorplan’s production line operates within the environmental and procedure requirements of ISO14001.
PuraSecure Doorsets are supplied with assembled rebated one piece frames.
Frame Section Details
Rebated: Single rebated frame section
Redwood: (Softwood) most commonly used material for paint finish applications on internal PAS24 doorsets only.
Hardwood: used on all external doorsets and where durability and security are paramount.
Security vision panels for doors are available within the certification parameters. Security glass and beading is used to achieve this. Please enquire with your specific requirements.
Dorplan’s ability to support clients in the coordination of finishes throughout the project is a much sought after service. Especially when tying in hardwood floors and furniture with the finishes on doorsets can be very challenging. With the perse range timber species and colouring effects available together with the colour blending staining service we offer, nearly all coordinating finishes can be achieved.
Typical timber species available:
European Oak, American White Oak, American Black Walnut, Wenge, Steamed Beech, Maple, Cherry, Ash, Sapele, Sycamore, Zebrano, Teak, Birch, Mahogony, Elm, Cedar, Chestnut
Veneer types: Crown Cut, Quarter Cut, Bookmatched, Birds Eye, Figured, Weathered
Special finishes: Stained lacquer, Smoked, Fumed, Polyester & Polyurethane
Hardwoods are factory sprayed with clear satin lacquer but special sheen levels can be supplied where required from 5% dead matt to 90% high build gloss polyester lacquered.
‘Primed’ doors and frames are a legendary preference in the UK. Site decoration for doors, frames and architraves is often viewed as the most practical and cost effective solution. Dorplan offer their doorsets in primed or Factory spray paint to any colour to your selected sheen level.