Our high-performance security doorsets combine style with peace of mind in any location.
Our high-performance security doorsets combine style with peace of mind in any location. PAS24/SBD enhanced security performance requirements for door assemblies are available in single and double leaf, internal and external door assemblies.
Crimecheck: Internal PAS24 timber doorsets
Stormcheck: External PAS24 timber doorsets
Extremetherm: Insulated external PAS24 timber doorsets with low U-values
PuraSecure is available in standard and bespoke sizes. Please contact us about your bespoke requirements.
Our standard sizes are as follows:
926 x 2040 3’0” x 6’6” (914 x 1981mm)
826 x 2040 2’10” x 6’6” (864 x 1981mm)
726 x 2040 2’9” x 6’6” (838 x 1981mm)
626 x 2040 2’6” x 6’6” (762 x 1981mm)
526 x 2040 2’3” x 6’6” (686 x 1981mm)
426 x 2040 2’0” x 6’6” (610 x 1981mm)
- 1’9” x 6’6” (533 x 1981mm)
- 1’6” x 6’6” (457 x 1981mm)
Fire and sound ratings
dB ratings are available from 29dB. For the full range of dB-rated doorsets up to 55dB, see our PuraSound
Fire ratings are available as follows:
Doors can be finished with exposed or concealed lippings, as shown in these images.
All our timber is FSC certified.
If required, please ask for chain of custody certification when requesting a quote.
Frame construction is a critical part of maintaining security performance. Two main framing options are available.
Frames are supplied assembled. They can be sent with the door pre-hung in them or separately in advance to support site schedules.
Mid-range option for internal doors. It is our most popular option for painted doors, although it can be stained or lacquered. Suitable for fire-rated and acoustic doorsets.
Redwood is suitable for internal use only for PuraSecure doors.
Excellent for durability and security. A variety of species is available. We recommend lacquer or stain to allow the beauty of the wood to be seen. Suitable for fire-rated, acoustic and secure doorsets.
Steel frames are available for any door and supplied with hardware or factory-prepared for it.
All our timber is FSC certified. If required, please ask for chain of custody certification when requesting a quote.
Vision panels and side/over screens can help to increase visibility, distribute light and enhance design. In certain locations, such as entrances, they are a legal requirement with defined minimum sizes (see below).
To achieve your security requirements there may be some restrictions but we will guide you through what is possible to ensure these are maintained.
Bespoke panels over or to the side of a door can be seamlessly integrated. They may be filled with glass or designer panels to complement styling of the door or room. We will advise on how to incorporate these to maintain SBD requirements.
Laminated: two sheets of glass with a PVB (non-fire-rated) or intumescent layer in the middle. May crack under pressure but mostly sticks to the central layer and remains in one piece.
Tempered: Heat-treated to give resistance to impact; where breakage does occur it shatters into tiny pieces.
Glass fire ratings are available as follows:
Glass can be supplied with a variety of finishes. Combinations of these finishes can be used, for example to offer privacy in lower panels and visibility in higher panels:
Vision panels in entrance doors
These are governed by the Government’s Building Regulations parts M (Access to buildings) and K (Protection from falling, collision and impact). This diagram shows the minimum requirements for vision panels in entrance doors.
There are two main types of beading for vision panels: bolection and flush. Beading is supplied in hardwood species, with finish to complement the door. Both examples here are shown as for an FD60 door, with intumescent strips between the beading and the glass. Fixings may vary on PuraSecure doors.
A secure door doesn’t have to be a plain door. Internal doors can be finished to suit your requirements and we can support you in the co-ordination of finishes across your whole project. We will support you with co-ordination of external finishes. Some of our most popular options are shown below and we can source many others. For a true representation of colour or finish, please ask us for a sample.
Paint and lacquer finishes
Timber doors can be supplied unfinished, lacquered, primed or spray-finished. Finish sheens from 5% dead matt to 90% high-build gloss can be achieved. We can match any RAL colour, contact us
for samples. Among our most popular finishes are grey oak and painted white wood.
The most common species are shown here but others can be sourced – ask us for any special requirements.
The most popular cuts are crown and quarter, although rift and rotary are also frequently chosen. Unusual cuts are also available, including figured quarter, bird’s eye, burr and fiddleback quartered. Contact us to find out what cuts are available for your preferred species.
Veneers can be matched in different ways to achieve a variety of effects as shown below.
Book match: veneers are mirrored to give a symmetrical effect
Quarter: veneers are mirrored and turned to give an effect radiating from a central point
Slip: leaves are laid side by side to give a gradually-varying repeat pattern
Woods can have additional treatments applied to them for cosmetic or performance purposes. These samples show the impact of treatment on a standard oak veneer. For a true representation, please ask us for a sample.
High gloss: can be combined with (as here) or without stain to give a stunning designer gloss to the wood
Polyurethane coated: a durable coating that protects the wood while allowing the natural grain to shine through
Smoking: retains the wood’s natural beauty but darkens it and brings out deeper tints
Staining: adds depth or colour to the wood, while retaining the visibility of the natural grain
Grooves and inlays
For an extra designer touch, doors may be grooved or have colour-matched inlays.
Also a popular choice for secure doors, laminates offer a durable, scratch-and damage-resistant alternative to wood. Matching finishes can be achieved on frames.
Depending on the location and purpose of the door, variable laminate coverage may be desired. Dorplan can meet any requirement from part-faced to full encapsulation.
We use a range of laminate suppliers, including Formica
, who between them offer almost every conceivable colour, pattern and texture.
The range of laminate options available is so extensive that the only limit is your imagination. Designs are complemented by textures to achieve an authentic feel to the materials represented. Popular choices include: (images courtesy of Egger)
The range of laminate options available is so extensive that the only limit is your imagination. Designs are complemented by textures to achieve an authentic feel to the materials represented. Shown below are just a few of the myriad choices available: (images courtesy of Egger)
Wood effect: a huge selection of timber types is available. This is supported by a range of wood grain textures that can be matched to timber types to give a natural feel.
Colour: A rainbow of colours can be used to complement any scheme in hues from subtle pastels to vibrant primary colours.
Many other finishes are available, including industrial, geological and metallic effects, and textiles or patterns. They can be enhanced with textures that complement the design and add authenticity to the finish.
Note that we do not recommend highly-textured surfaces in hygiene settings.
Seen something you like online? Let us know and we can source samples for you.
Our in-house manufacturing facilities allow us to offer significant flexibility to customers, from fast turnaround to a variety of delivery options.
Doorsets can be supplied in any combination to suit project schedules and site requirements. For example, we can supply flat-packed elements in separate deliveries at different times. At the other end of the scale we can supply single packages containing pre-hung, pre-finished doorsets with pre-installed ironmongery.
We also take exceptional care with packaging to ensure the products you open on site are exactly as they were when they left us.